Homax Self-Adhesive Wall Guard, 3-1/4 in

    Wall patch and drywall · Wall guard

    Homax Self-Adhesive Wall Guard, 3-1/4 in

    Best for Stopping a doorknob from punching the wall again

    $4.49

    Opens our retail partner in a new tab. Payment, delivery and returns happen there.

    Diameter
    3-1/4 in
    Color
    White
    Backing
    Foam

    Features

    • Peel-and-stick, with no tools or fasteners
    • Round guard, 3-1/4 inches across, in white
    • Foam backing to soften doorknob impact
    • Takes paint or wallpaper to match the wall

    Specifications

    BrandHomax
    Item number5103
    TypeWall guard
    ShelfWall patch and drywall
    Diameter3-1/4 in
    ColorWhite
    BackingFoam

    For best results

    • Fill and sand any existing dent first, since the guard holds best on a flat surface.
    • Measure your knob before you buy, because a large knob or lever may call for the 5 inch size.

    How to use

    1. Step 1Open the door until the knob touches the wall and mark the spot.
    2. Step 2Wipe the area clean and let it dry so the adhesive grips.
    3. Step 3Peel off the backing and press the guard firmly over your mark.
    4. Step 4Paint over it once it is stuck down if you want it to match.

    About this product

    Stopping a doorknob from denting the same spot

    A door that swings too far puts its knob into the wall at the same point every time, and the dent slowly grows into a hole. This Homax guard is a white disc 3-1/4 inches across that you stick on right where the knob lands.

    Its foam backing absorbs part of each impact, so the drywall behind it takes less of the blow. You can paint or wallpaper over the face to blend it in. It goes up just as easily on a fresh wall in new construction as on a room you are renovating.

    If the Self-Adhesive Wall Guard, 3-1/4 in does not fit your job, the wall patch and drywall shelf has 14 more products from the Homax product family.

    Before you start

    In a house built before 1978 the paint around the hole may contain lead. Do not dry-sand or power-sand old paint until it has been tested, mist the area and clean up with a damp cloth instead of a broom. Drywall dust itself is fine and travels, so sand with a mask on.

    Other products for this job

    All wall patch and drywall